Message boards

Boards Home Page

NEW: Shopping
Green Home
Real Estate
Kitchens & Baths
Decorating
Remodeling
Gardening
At Home
Crafts
Fan Favorites



GUIDELINES

  • Posts are category specific.
  • No advertising.
  • No off-topic or off-color posts.
  • No name calling, personal attacks or flaming.
  • Trigger words will cause post moderation.

    Full Guidelines

    For general help on HGTV's Message Board, click the tab labeled "Tools," and choose "Help" from the dropdown menu.





  • MORE LINKS

    Adding Curb Appeal
    Crazy for Candles
    Decorating Glossary
    Design Basics
    Design on a Dime: Decorating Demos
    Design Styles
    Fabulous Fireplaces
    Headboards
    Top 10 Amazing Homes
    Trash to Treasure
    Universal Design
    Wonderful Windows
    Yard Sale Basics





    Go
    New
    Find
    Notify
    Tools
    Reply
      
      Login/Join 
    Posted
    I am in the process of doing my front patio. It's 12 x 20 the first 6 ft is under roof with slight incline. The other 6 ft has a 1 1/2 inch fall and I'm looking for something to put over the entire patio. It's currently concrete. To correct the decline what is the maximum amount of mortor or concrete I can place under pavers or flagstone to help correct it?

    Is there a product that will bond concrete to concrete? I'm located in Florida so freezing is not an issue.
     
    Posts: 5 | Registered: Dec 02, 2005Reply With QuoteEdit or Delete MessageReport This Post
    Posted Hide Post
    D.S. I would have thought in two weeks you would have received some proper guidance for your concrete problem.

    Do consult a professional contractor who works in concrete. A form is going to be necessary to properly alleviate the acclivity.
    Doing it yourself -- as you point out, you don't have the wherewithall of finishing concrete to concrete. A bad job of this will certainly ruin your day.

    At least consult a hardware man in any of the large box stores that would (should) have some knowledge about products they sell that address this issue.

    As I see it, you are going to need about 3 cubic yards of concrete--I think that amount is going to require the proper mixing by you or have it come to you pre-mix by truck.
    The price of such could be looked into either way--especially if the truck can gain access to the patio area after the forms are made.

    Then there's the matter of proper application--and I think 240 square feet is sufficient area to be careful about how it is applied and what measures to keep it from cracking while it is in the drying process.

    You could never hope to solve the fall of the grade (inch and a half) by simply adding concrete back to level. That would give you nothing but headaches---the edge of such would constantly chip away. So the entire patio area would have to be covered with a new layer.

    In this regard then, you might wait...take a new look at your front patio area....could a wall or other feature be made to heighten your front landscaping scheme.
     
    Posts: 319 | Location: Ontario | Registered: Oct 25, 2006Reply With QuoteEdit or Delete MessageReport This Post
    Posted Hide Post
    Does it slope to or away from the home? It should slope away to keep water from pooling on your porch with Florida's blowing summer showers. You could do an infill with concrete, then use a rough ceramic tile to finish. You still ought to consider keeping some slope away from the house. Consider putting a bullnose around the edge as a border and to protect the edge of the concrete.

    Here's a decent Q&A site for tile:
    http://www.irisceramica.com/contatto/faq_tutti.php?lang=en
     
    Posts: 121 | Registered: Aug 30, 2006Reply With QuoteEdit or Delete MessageReport This Post
     Previous Topic | Next Topic powered by eve community  
     

    HGTV.com    HGTV Message Boards    HGTV Message Boards  Hop To Forum Categories  Gardening  Hop To Forums  Lawns & Landscaping    Patio Project

    © Scripps Networks 2008